Dwin 2 Instruções de Operação descarregar pdf (Página 31)

2D. Connecting the TransVision

™

4 System

A. Connect AC power receptacle to a non-switched 120 VAC outlet using

the power cord provided with the TransVision

™

4 system.

B. Connect the digital input to the TransVision

™

4 processor using the cir-

cular connector of DVI cable.

NOTE: The TransVision

™

4 requires the use of a DWIN DVI cable between

the Projector and the Digital Video Processor to operate correctly !

C. The IR Receiver and the Power LED are located on top of the projector.

D. The POWER LED is a multi-purpose indicator:

• When the LED is dark the AC power to the unit is turned off.

• When the LED is ﬂashing on and off, power is connected and the unit

is in the standby mode.

• When the LED is on the unit is powered on.

• When the LED is ﬂashing fast, the projector lamp failed to ignite. The

lamp may have failed or overheated. In case the lamp is hot, wait ap

proximately 1 minute to turn the unit on. If the lamp has failed, contact

your DWIN dealer or DWIN for a replacement.

LED

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 42 43

Sem comentários

Dwin 2 Instruções de Operação Página 31